PE, PVC-U, GRP and steel pipe for gas, water-supply and district-heating networks — sized to your project drawings, sourced factory-direct from audited plants, inspected before loading.
Gas, district heating and water-supply pipework is a category of its own — the stripe colour tells you the network, the standard tells you the wall. We supply all of them to the same project drawings.
PE100 pipe in coils and straight lengths — gas networks in yellow stripe (EN 1555-2), drinking-water networks in blue stripe (EN 12201-2). SDR 11 and SDR 17.6 wall classes, pressure ratings to match your network, dn25–dn630 ex-stock, dn710–dn1200 on order. Drinking-water approvals available.
Pre-insulated bonded pipe to EN 253 — steel carrier pipe, PU foam insulation and HDPE casing as one bonded system, DN25–DN500. Leak-detection wires, insulated fittings and joints supplied with the pipe so the network welds as one continuous system.
PVC-U sewer pipe to EN 1401 (SN4 / SN8), GRP pipe for aggressive media and large diameters, and steel pipe with corrosion protection for crossings and above-ground runs. Stiffness classes and joints matched to your trench design.
Electrofusion and butt-fusion fittings, saddles and tapping bands, flange adapters, mechanical couplings and valves — supplied in the same batch as the pipe, inspected before loading. One supplier, one set of pressure-test documents.
The table your project engineer requests first — send us the drawing and we will quote against it.
| Network | Standard | Material | Diameter range | Notes |
|---|---|---|---|---|
| Gas | EN 1555-2 | PE100, yellow stripe | dn25 – dn630 | SDR 11 / SDR 17.6, coils & sticks |
| Water supply | EN 12201-2 | PE100, blue stripe | dn20 – dn1200 | PN10 / PN16, drinking-water approved |
| District heating | EN 253 | Steel + PU + HDPE casing | DN25 – DN500 | Bonded system, leak-detection wires |
| Sewer / drainage | EN 1401 / EN 13476 | PVC-U, GRP | DN110 – DN800 | SN4 / SN8, sealed or plain sockets |
| Crossings & specials | Per drawing | Steel, coated | Per drawing | Welded on site, corrosion protection |
Pipe is only half the job — the joints have to hold. We match material, diameter and fittings to your trench design and pressure-test records.
Send us the project drawings — diameters, SDR / PN classes and fittings schedule. We confirm the specification, quote factory-direct and hold the quality line from production through to pressure test.
Factory audit report before production, pre-shipment inspection with photos, mill and pressure-test certificates, and consolidated freight to your yard or site — one invoice from an EU company.
Diameters, standards, fittings and delivery — quoted within one business day from audited factories.
