One discipline, two working environments. Above the carriageway, the hoses that convey wastewater and power the jetting fleet; below it, the inspection and cleaning systems that keep the network serviceable.
Different pressures, media and operating conditions — each duty receives the hose it requires. Sourced from audited factories and inspected before loading.
Suction, discharge and lay-flat hoses in PVC, rubber and TPU — spiral-reinforced, vacuum-rated, abrasion and weather resistant. Bore sizes DN50–DN250 for sludge tankers and combination units; wall classes and couplings matched to your fleet and drawings.
High-pressure jetting hoses in all standard diameters and pressure classes — textile or steel-wire braid, 180–300 bar working pressure, −35 to +80 °C. Smooth bore for low friction, abrasion-resistant cover that survives dragging over manhole edges; pressure-tested with BSP fittings, cut to your drum length.
Bauer-type lever couplings, claw (Guillemin) couplings, flange adapters, reducers and ball valves — supplied in the same batch as your suction and jetting hose, matched to your fleet, drums and manhole couplings.
The equipment that sees inside the network — and the tools that clean it.
6-wheel and track crawler systems with pan-tilt-zoom cameras for DN150–DN1500 mains. IP68 sealed, incline-capable, with distance encoders and lift attachments.
Compact systems for laterals and small diameters DN40–DN200 — 512 Hz sonde locating, self-levelling heads, 60–120 m rods for residential and commercial lines.
Ruggedised consoles with defect-coding software (EN 13508-2 compatible), reporting, video logging and GIS export for condition assessment workflows.
Sonar units for submerged pipes and laser profiling add-ons for deformation and cross-sectional analysis — quantify deformation, not just see it.
Zoom-pole manhole cameras with up to 30x optical zoom and electric tilt — survey pipes from street level in minutes.
Standard cleaning, grenade and triple-jet flushing nozzles — plus rotating grinding heads with carbide teeth for hardened deposits like cement and grease. Hardened stainless steel, 0.2–7.6 kg classes, matched to hose diameter and truck flow rate. Rear jets for traction, front jets for cutting.
Hose, nozzle and camera function as one system. Send us the pipe diameter, the deposit type and the jetting unit — we will match the set.
